PRESSURE METER
Model : PS-9302
*
Meter can cooperate with 2, 5, 10, 20, 50, 100, 400 bar sensor, new
calibration are not necessary when change the new sensor .
* Zero button on the front panel, easy adjust the zero value of pressure
sensor.
* Push button gain adjustment, usage for calibration precisely if necessary.
* When change the new pressure sensor, just select pressure type ( 2, 5, 10,
20, 50, 100, 400 bar ) on the front panel button. The sensor type will
memorize into the circuit permanently by EEPROM.
* Separate pressure sensor, easy operation. & remote measurement.
* Microprocessor circuit assures maximum possible accuracy, provides special
functions and features,
* 8 kind pressure units ( bar, psi, Kg/cm2 mm/Hg, inch/Hg, meter/H20,
inch/H20, Atmosphere ) select by push button on the front panel
* Super large LCD display with contrast adjustment for best viewing angle.
* Optional full line presssure sensor ( 2, 5, 10, 20, 50, 100, 400 bar ) are
available.
* Records maximum & minimum readings with recall.
* Data Hold function for stored the desired value on display.
* Auto shut off saves battery life.
* Built-in low battery indicator.
* 4 pin DIN socket, 2 pins to provide DC 5 V exciting voltage ( power supply
) to pressure transducer, another two pins for accept transducer signal of
100mV full scale.
* RS 232 PC serial interface, can match the personal computer used as the
Data Logger, Pressure Recorder.... & other modern pressure measuring system.
Circuit : Microprocessor LSI circuit.
Power off: Auto shut off, saves battery life, or manual off by push button.
Display : 61 mm x 34 mm supper large LCD display. 15 mm ( 0.6" ) digit size.
Sampling time : Approx. 0.8 second.
Display units bar, psi, Kg/cm2, mm/Hg, inch/Hg, meter/H20 inch/H20,
Atmosphere.
Operating temperature : 0 to 50 ( 32 to 122 ).℃ ℉
Pressure transducer : Optional, exciting voltage DC 5V, Sensor max. range
output is DC 100 mV.
Operating humidity :Less than 80% R.H.
Zero adjust
Push button on the front panel.
Power supply : 006P DC 9V battery(heavy duty).
Span adjust
Push button gain adjustment, usage for calibration precisely if necessary.
Power current : Approx. DC 8.5 mA.
Weight :345 g/0.76 LB
Transducer mV input signal
Approx 100 mV (Full Scale).
Dimension : 180 x 72 x 32 mm ( 7.1 x 2.8 x 1.3 inch ).
Accessories included
* Instruction manual.........................1 PC * Hard carrying case (
CA-06 )...........1 PC
Exciting output power supply
DC 5 V.
Optional accessories
* Pressure sensor, PS100-xxBAR * Data acquisition software ( Windows version
), SW-U101-WIN * RS232 cable, UPCB-01
Data hold
By push button.
Data record
Record maximum & minimum readings.
Data output
RS 232 PC serial interface.
Compare to EXTECH
407495................Heavy Duty Pressure Meter
Datasheet
