LASER PHOTO / CONTACT TACHOMETER

LASER PHOTO/CONTACT TACHOMETER

Model : DT-1236L

PrintableDatasheet

ISO-9001, CE, IEC1010

LASER PHOTO/CONTACT TACHOMETER Model : DT-1236L

FEATURES

Combination Contact/Photo Tachometer
Combines both contact and non-contact models for use in all applications
Characters on display reverse direction depending on contact or photo mode
Uses visible light to read up to 6" (150mm) from target
Memory/readings button holds last reading for 5 min and recalls min/max readings
Unique display where characters reverse direction depending on measurement mode you are in
Large 0.4” (5 digit) LCD display
Microprocessor based with quartz crystal oscillator to maintain high accuracy
Tachometer memory stores last, max and min readings
Provides wide RPM (photo and contact) and Linear Surface Speed (contact) measurements
Accurate to 0.05% with max resolution of 0.1rpm in either photo or contact mode
Complete with tips and wheel for rpm or linear surface speed,
four 1.5V AA batteries, reflective tape and carrying case.
Narrow beam Laser photo tachometer for accurate non-contact RPM measurements
Measurements from up to 6.5ft from the target for improved safety and accessibility

SPECIFICATIONS

Photo Tachometer : Circuit Exclusive one-chip of

10 to 99,999 RPM. microcomputer LSI circuit.

Measurement Contact Tachometer : Operating 0 - 50 ( 32 - 122 ).℃ ℉

& Range 0.5 to 19,999 RPM. Temperature

Surface Speed : Operating Less than 80% R.H.

m/min. -0.05 to 1,999.9 m/min. Humidity

ft/min. -0.2 to 6,560 ft/min. Memory Last/Max./Min. value.

RPM: Battery 4 x 1.5V AA ( UM-3 ) batteries.

0.1 RPM ( < 1,000 RPM ). Power Photo type :

1 RPM ( 1,000 RPM ). Consumption Approx. DC 21 mA.

Resolution m/min.: Contact type :

0.01m/min. ( < 100 m/min. ). Approx. DC 7 mA.

0.1m/min. ( 100 m/min. ). Size 215 x 67 x 38 mm.

ft/min.: ( 8.5 x 2.6 x 1.5 inch ).

0.1 ft/min. ( < 1,000 ft/mn. ). Weight 280g ( 0.61 LB )

1 ft/min. ( 1,000 ft/mn. ). * including batteries.

Display 5 digits, 10 mm ( 0.4" ) LCD. Carrying case............................. 1 PC.

Accuracy ± ( 0.05% + 1 digit ), RPM only. Reflecting tape marks

Detecting 5 cm to 200 cm typically. Accessories ( 600 mm )................................ 1 PC.

distance *The specification detecting Included RPM adapter ( CONE )

distance ( max. 200 cm ) are .............................................1 PC.

tested under the 1800 RPM & RPM adapter ( FUNEL )

the size of the reflecting tape .............................................1 PC.

is 1 cm x 1 cm. Surface speed test wheel

Light Source 1 mW class 2 laser diode. .............................................1 PC.

Time base Quartz crystal. Operation manual...................... 1 PC.

* Appearance and specifications listed in this brochure are subject to change without notice. 0408-DT1236L