FEATURES

* Measure max. 1000 A DCA or ACA by the inductive

 * LCD display, easy & clear readout. conductor, contactless.

* High internal impedance, assures min. measuring error.

* Economical cost with professional quality.

* LSI-circuit provides high reliability and durability.

* Design meet IEC 1010 safety requirement.

* Built-in low battery indicator.

* ACA, DCA, ACV, DCV, ohms, Diode.

 * Overload protection circuit is provided for all range.

* Built-in Data Hold function.

* Compact & heavy duty ABS housing plastic case.

GENERAL SPECIFICATIONS

 Display 13 mm (0.5") LCD, 3 1/2 digits.

Power Approx. DC 10.8 mA. Max. indication 1999.

Consumption Measurement ACA, DCA, ACV, DCV, ohms,

 Operating Temp. 0 to 50 (32 to 122 )℃ ℉

Range & Data hold.

Operating Less than 80% RH.

Polarity Automatic Switching, " - " indicates Humidity negative polarity.

Weight 400 g/0.90 LB (including battery).

Current Sensor Hall effect sensor.

 Dimension 230 x 70 x 36 mm(9.1 x 2.8 x 1.4 inch)

Zero adjustment DCA External knob, for DCA zero Conductor Jaw 78.5 mm ( 3.1 inch ) - outside adjustment. Size Others

 Automatic adjustment.

Accessories Test lead (red & black)............1 Pair Over-input Display shows '1' or '-1'. Operation manual................... 1 PC. Sampling Time Approx. 0.4 second. Battery Heavy duty type, DC 9V battery. 006P,

 Carrying case MN1604 ( PP3 ) or equivalent. Accessories

Full range adapters

ELECTRICAL SPECIFICATIONS ( 23± 5℃ )

 Function Range Resolution Accuracy Overload Circuit Remark Protection

 DC Voltage 200 mV 0.1 mV AC/DC 400 V. 200 V 0.1 V ± ( 1 % + 1 d ) AC/DC 600 V.

Input impedance 600 V 1 V 10 Mega ohm AC Voltage 200 V 0.1 V ± ( 1 % + 2 d ) AC/DC 600 V.

Input impedance ( 50/60Hz ) 600 V 1 V 10 Mega ohm Resistance 2000 ohm 1 ohm ± ( 1 % + 1 d ) AC/DC 400 V AC/DC 200 A 0.1 A ± ( 1.5 % + 15 d ) AC/DC 1000 A ACA Spec.

Current 1000 A 1 A ± ( 2 % + 5 d ) test on 60 Hz/50 Hz.

 Diode Check Short/non conductance, good/defect test. Approx. diode VF ( forward voltage ).

 Data Hold Available for all functions to keep the data hold on the display . Remark

* Input impedance for ACV & DCV range is 10 Mega ohm.

* ACA, ACV frequency response is from 40 to 400 Hz.

* ACA, ACV specification be tested on sine wave 50/60 Hz.